Share to
PRODUCTS CENTER
Papua New Guinea TC465
SPC floor is a product that extrudes PVC base material by extruder combined with T-shaped die, and uses three-roll or four-roll calender to separate PVC wear-resistant layer, PVC color film and PVC base material, and heat lamination and embossing at one time.
Category:
Product Description
SPC (stone plastic composite) floor is a new type of environmentally friendly floor developed based on high technology.
SPC floor is a product that extrudes PVC base material by extruder combined with T-shaped die, and uses three-roll or four-roll calender to separate PVC wear-resistant layer, PVC color film and PVC base material, and heat lamination and embossing at one time.
SPC floor is an all-rounder that combines the advantages of ceramic tiles and other types of floor materials.
Product Detail
| >Material | >SPC |
| >Usage | >Indoor |
| >Surface Treatment | UV Coating |
| >Product Type | >SPC Flooring |
| >Product Name | >High Dimensional Stability Extrusion Spc Click Vinyl Floor |
| >Size (mm) | >1220*184mm/1520*228mm |
| >Thickness | >4mm/4.5mm/5mm/6mm |
| >Wear Layer | 0.3mm/0.5mm |
| >Surface Texture | >Embossed |
| >Installation | >Valinge/I4F |
| >Features | >Waterproof / Wear Resistant / Fire Retardant / Sound Barrier |
| >Advantages | >Easy Click to Install / Labor Costs Saving |
| SPECIFICATIONS OF SPC (RIGID CORE) FLOORING | ||
| Item | Standard | Test method |
| Surface length | △L≤0.25mm | EN 13329, ISO 24341 |
| Surface width | △Waverage ≤0.05mm ,Wmax.-Wmin ≤0.10mm | EN 13329, ISO 24341 |
| Thickness tolerance | Overall thickness: ±0.15mm Vinyl layer thickness: ±0.03mm Core layer thickness: ±0.05mm | EN 13329, ISO 24340 |
| Squareness | Q_max ≤ 0.10mm | EN 13329, ISO 24342 |
| Edge straightness | S_max ≤ 0.20mm/m | EN 13329, ISO 24342 |
| Flatness (f) | Cupping: fw,convex ≤0.15% / fw,,concave ≤0.15% Bending: fl, convex ≤0.50% / fl, concave ≤0.25%. | EN 13329 |
| Installation gap | Average Oa≤0.06mm Maximum Omax≤0.10mm Check the installation gap between planks of the same batch and gap with the click metal mold. | EN 13329 |
| Height difference | Average： ha≤0.05mm Maximum：hmax≤0.10mm Check the height difference between planks of the same batch and height difference with the click metal mold. | EN 13329 |
| Density (not included EVA layer) | Base core: 2100±100 kg/m3 Vinyl: 1200±100 kg/m3 Finished: 1850 – 2100 kg/m3 for 3mm thickness 1930 – 2130 kg/m3 for 4mm thickness | EN 436 |
| Bending strength | Average ≥15.0 Mpa | EN 310 |
| Elasticity Test | Average ≥ 3500 Mpa | EN 310 |
| Shrinking, warping under the temperature of 80 degrees in 6 hours (Size 220* 220mm) | Shrinking in length average: ≤ 0.15%; Shrinking in width average: ≤ 0.15%; Cupping : ≤ 1.0mm | ISO 23999 |
| Traction strength of click | Short click: ≥110 (N/50mm) | ISO 16906 |
| Peeling strength between core and Vinyl | ≥ 70 (N/50mm) | EN 431 |
| Peeling strength with EVA/ IXPE | Mass production: Average ≥ 5N/50mm, Minimum ≥4.5N/50mm | EN 431 |
| Abrasion Resistance | ≤0.015g/1000 rounds (CS-17) | NA |
| Scratch Resistance | Level 1-2 No change in surface | EN 16094 |
| Impact Resistance | Big ball ≥1600mm; Small ball ≥20N (≥IC2) | EN 13329 |
| VOC | FloorScore passed | ISO 16000 |
: next page
Copyright © Echo Plastic Flooring Supply Company Limited